- Inspection found left manifold leaking with broken hardware. Oil leak noted at oil feed line. Recommend new manifolds, hardware and turbo fittings for oil leak. Checked codes: P0401 EGR A flow insufficient detected.
- Drained coolant, removed intake, upper & lower intake manifolds, hot side charge pipe, turbo, up pipes and manifolds with heat shields. Found excessive oil/ carbon build up causing low flow & EGR codes. Cleaned build up. Inspected for coolant leak at rear of motor. Found coolant and oil fitting quick connects have large leaks. Removed and replaced all 3 fittings. Cleaned head surface for manifolds. Installed new manifolds with gaskets, studs, nuts and heat shield bolts. Re installed turbo, up pipes and down pipe with new gaskets, nuts, and studs on manifold to up pipe. Installed new gaskets on upper intake manifold and installed all removed parts. Installed new air filter and filled with new coolant. Road tested and inspected for leaks.
- Change engine oil and filter. Lube chassis. Visually inspect steering, suspension, exhaust, brakes and cooling system. Check all fluid levels and add as necessary. Inspect condition of drive belts and hoses. Check all exterior lighting. Reset maintenance reminder if applicable.
- Drain water from water separator, remove secondary fuel filter and install new filter. Remove primary fuel filter, clean bowl and install new fuel filter. Purge air from fuel system and start vehicle. Inspect for proper operation
Pamela M. gave our service a 5 star review on 5/7/2022